Lỗi biến tần Danfoss

 VINITECH chuyên sửa chữa biến tần, servo tại Đồng Nai, Bình Dương...

No. Description Warning Alarm Trip
locked
2   Live zero error (LIVE ZERO ERROR) X X X
4   Mains phase loss (MAINS PHASE LOSS) X X X
5   Voltage warning high (DC LINK VOLTAGE HIGH) X
6   Voltage warning low (DC LINK VOLTAGE LOW) X
7   Overvoltage (DC LINK OVERVOLT) X X X
8   Undervoltage (DC LINK UNDERVOLT) X X X
9   Inverter overload (INVERTER TIME) X X
10 Motor overloaded ( MOTOR, TIME) X X
11 Motor thermistor (MOTOR THERMISTOR) X X
12 Current limit (CURRENT LIMIT) X X
13 Overcurrent (OVERCURRENT) X X X
14 Earth fault (EARTH FAULT) X X
15 Switch mode fault (SWITCH MODE FAULT) X X
16 Short-circuit (CURR. SHORT CIRCUIT) X X
17 Serial communication timeout (STD BUS TIMEOUT) X X
18 HPFB bus timeout (HPFB TIMEOUT) X X
33 Out of frequency range (OUT FREQ RNG/ROT LIM) X
34 HPFB communication fault (PROFIBUS OPT. FAULT) X X
35 Inrush fault (INRUSH FAULT) X X
36 Overtemperature (OVERTEMPERATURE) X X
37-45 Internal fault (INTERNAL FAULT) X X
50 AMT not possible X
51 AMT fault re. nameplate data (AMT TYPE.DATA FAULT) X
54 AMT wrong motor (AMT WRONG MOTOR) X
55 AMT timeout (AMT TIMEOUT) X
56 AMT warning during AMT (AMT WARN. DURING AMT) X
99 Locked (LOCKED)